? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macomtech.com for additi onal data sheets and prod uct information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 1 low noise catv amplifier 50 - 1000 mhz rev. v2 maamss0067 advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. features ? low distortion ? low noise figure ? push pull design ? single positive supply ? lead-free 4 mm 20-lead pqfn package ? 100% matte tin plating over copper ? halogen-free ?green? mold compound ? 260c reflow compatible ? rohs* compliant version of maamss0003 description m/a-com?s maamss0067 is a gaas phemt mmic amplifier in a lead-free 4 mm 20-lead pqfn package. the mmic design is configured as a pair of cascode phemt amplifiers for broadband performance. it is designed for integration in a 75-ohm push-pull, low distortion, amplifier circuit. the device is ideally suited for use in catv, dbs, and hdtv applications where low noise figure and low distortion are required. parameter absolute maximum input power +20 dbm operating voltage +10 volts operating temperature -40c to +85c storage temperature -65c to +150c absolute maximum ratings 2,3 functional schematic pin no. pin name description 1 n/c no connection 2 n/c no connection 3 fb1 feedback 1 4 n/c no connection 5 n/c no connection 6 ri1 rf input 1 7 n/c no connection 8 n/c no connection 9 n/c no connection 10 ri2 rf input 2 11 n/c no connection 12 n/c no connection 13 fb2 feedback 2 14 n/c no connection 15 n/c no connection 16 ro2 rf output 2 17 n/c no connection 18 n/c no connection 19 n/c no connection 20 ro1 rf output 1 pin configuration 4 ordering information 1 part number package maamss0067 bulk packaging maamss0067tr-3000 3000 piece reel MAAMSS0067SMB sample test board (includes 5 samples) 1. reference application note m513 for reel size information. n/c n/c n/c fb1 n/c n/c n/c fb2 n/c n/c ri1 n/c n/c n/c ri2 ro1 n/c n/c n/c ro2 text text text text text text text text text text n/c n/c n/c fb1 n/c n/c n/c fb2 n/c n/c ri1 n/c n/c n/c ri2 ro1 n/c n/c n/c ro2 text text text text text text text text text text 4. the exposed pad centered on the package bottom must be connected to rf and dc ground. 2. exceeding any one or combination of these limits may cause permanent damage to this device. 3. m/a-com does not recommend sustained operation near these survivability limits. * restrictions on hazardous substanc es, european union directive 2002/95/ec.
? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macomtech.com for additi onal data sheets and prod uct information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 2 low noise catv amplifier 50 - 1000 mhz rev. v2 maamss0067 advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. parameter test conditions units min. typ. max. gain ? db 11.5 12.2 13.0 gain flatness ? db ? 0.4 1.0 noise figure ? db ? 3.3 4.0 input vswr ? ratio ? 1.3:1 ? output vswr ? ratio ? 1.5:1 ? output ip3 two tones at 397 & 403 mhz, +4 dbm output per tone dbm ? 32 ? composite triple beat, ctb 135 channels, +13 dbmv/channel at the input dbc ? -78 -70 composite second order, cso 135 channels, +13 dbmv/channel at the input dbc ? -78 -70 cross modulation 135 channels, +13 dbmv/channel at the input dbc ? -73 -64 p1db 400 mhz dbm ? 24 ? i dd +5 volts ma ? 190 225 electrical specifications: t a = 25c, freq: 50 - 1000 mhz, v dd = +5 volts, z 0 = 75 ohms test circuit with m/a-com balun etn1-1-13 handling procedures please observe the following precautions to avoid damage: static sensitivity gallium arsenide integrated circuits are sensitive to electrostatic discharge (esd) and can be damaged by static electricity. proper esd control techniques should be used when handling these devices. qty description 8 capacitor, 0.01 uf, 0603, smt, 10% (c1-c8) 2 capacitor, 2 pf, 0402, smt, 0.25pf (c9-c10) 2 inductor, 390 nh, 1008, smt, 10% (l1, l2) 2 balun, 1:1, m/a-com, etn1-1-13, smt (t1,t2) 2 resistor, 0 ohms, 0603, smt (r1, r2) external circuitry parts list test circuit schematic 5 5. the 1:1 baluns, t1 & t2, are m/a-com part number etn1-1-13. rf in t1 t2 c2 c7 c8 l2 c6 l1 c5 +5v +5v c3 c4 c1 rf out r2 r1 text text text text text text text text text text c9 c10 rf in t1 t2 c2 c7 c8 l2 c6 l1 c5 +5v +5v c3 c4 c1 rf out r2 r1 text text text text text text text text text text c9 c10 6. reference m/a-com application note s2083 for recommended pcb configuration. r1 and r2 are 0 ohms. recommended test circuit layout 6
? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macomtech.com for additi onal data sheets and prod uct information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 3 low noise catv amplifier 50 - 1000 mhz rev. v2 maamss0067 advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. noise figure vs. frequency, 25 c gain vs. frequency to 3 ghz gain oip3 vs. p in at 400 mhz, 25 c output return loss typical performance curves input return loss -10 -5 0 5 10 15 20 0 500 1000 1500 2000 2500 3000 +25c +85c -40c frequency (mhz) -30 -25 -20 -15 -10 -5 0 0 200 400 600 800 1000 +25c +85c -40c frequency (mhz) -30 -25 -20 -15 -10 -5 0 0 200 400 600 800 1000 +25c +85c -40c frequency (mhz) 30 31 32 33 34 35 36 -10 -8 -6 -4 -2 0 2 4 pin (dbm) 0 1 2 3 4 5 0 200 400 600 800 1000 frequency (mhz) 10.5 11.0 11.5 12.0 12.5 13.0 13.5 0 200 400 600 800 1000 +25c +85c -40c frequency (mhz)
? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macomtech.com for additi onal data sheets and prod uct information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 4 low noise catv amplifier 50 - 1000 mhz rev. v2 maamss0067 advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. gain vs p out at 400 mhz typical performance curves (continued) lead-free 4 mm 20-lead pqfn ? 10 11 12 13 14 15 16 18 20 22 24 26 +25c +85c -40c pout (dbm) ? reference application note m538 for l ead-free solder reflow recommendations. meets jedec moisture sensitivity level 1 requirements.
|
